当前位置：Do not place a soldering iron near or on the body of the capacitor to avoid the sleeves of the capacitors deforming and cracking under high temperature.
The design of absorb tin gun and soldering iron is lightweight, suitable for prolonged use.
The Japanese use a hot piece of iron like an old-fashioned soldering iron to burn away the fluffy material from inside the quill.
Heaters of high temperature, such as soldering irons, should be kept away from the vinyl insulation sleeve of capacitor which to avoid the cause made over heat or break down to sleeve.
The second technique involved using braided solder wick and a soldering iron with a blade tip to remove residual solder from the PCB pad.
It's very wise to keep a soldering iron, a roll of solder and desoldering equipment handy at all times.
Vacuum gun and 24v soldering iron have good protection of PCB by antistatic design.
Heat up your soldering iron and tin it by allowing it to melt a drop of solder onto its tip.
Use heat as required, in various degrees, from heat guns, soldering irons, torches and welders.
In the few hours I was there, Shade scraped the outer layers off several leaves, dipped some others in scalding water, and burned the trunk with a soldering iron.